Product details

Use this metal Cross Base Sprinkler Riser on hard standing areas to provide temporary watering for bedding plants and standing out areas. The cross base sprinkler can also be used on turf areas where a spiker riser would cause damage.

The riser has a pass through tee design to enable the sprinklers to be daisy chained together in a run. Simply connect an inlet hose to one side and then on the outlet, connect another hose to go off to the next sprinkler in the run. Use geka blanking cap fitting at the end of each run.

The sturdy riser is manufactured using heavy duty galvanised steel tube welded to a galvanised tee. The riser includes geka fittings , connect hose with geka hosetails. The riser pipe has a 1/2″ BSPM thread to accept a variety of sprinkler nozzles.

Metal cross base sprinkler riser available 1.06m high.

Choose an adaptor to allow the use of different sprinklers, or choose the Naan 501 sprinkler option (adaptor included). This  is a highly economical sprinkler with a low precipitation rate with a turbo hammer operation, and a 14.5-15m diameter.

FPTI2-3 Threaded increasing piece – allows connection of Naan 501 and Rotoframe
FPTS2 Threaded socket – allows connection of sprinklers that have 1/2″ BSPM thread
KECP2 1/2″ Cap female outlet – allows connection of sprinklers with Eindor taper

 

Cross Base Sprinkler Riser

Very sturdy riser for hard standing areas

From:   £51.00 (excl VAT)

From:   £61.20 (inc VAT)

- +

truck icon Free Economy delivery on orders over £125 + vat