Allows underground valve boxes to be connected to an existing outdoor tap with a permanent piped connection.
The kit consists of a 2-way brass manifold that screws onto the outdoor tap – by using a manifold the tap can still be used for filling a watering can or connecting a hose.
On the other outlet of the manifold 25m of underground pipe runs from the tap position to the valve box. There is also a connection fitting onto vales box itself.
The STK20 kit is designed to connect onto a single valve box.
The STK25S kit will connect two valve boxes and also included a length of low voltage cable, allowing the valve box to be controlled by a wall mounted controllers such as the Hunter X-core or the Hunter XC Hybrid. Additional fittings can be purchased to allow the STK25S to operate up to 4 valve boxes.
NOTE: Tap and backplate are not included.