For the best results with the minimum of effort an automated popup sprinkler system can be installed. This package includes 4 popup sprinklers, each one located half way down the side of the green, pipework that is located in the roll off gutter and a pump, tank and automatic controller.
As the sprinklers need a high pressure and large flow a water storage tank is included which will fill up from the water mains. A multi stage pump will then pressurise the water to allow the sprinklers to cover the bowling green. An automatic irrigation controller will bring the watering on early in the morning and has a rain sensor over-ride to ensure watering does not take place after it has rained.
For ease of installation the pipework is designed to be trenched into the roll off gutter. At each sprinkler location a high quality valve-in-head sprinkler is operated by the control panel. The pump assembly will be pre-assembled and tested in our factory to make installation easier and the sprinklers and swing joints are all pre-assembled for easier installation into the supply pipe.
Two options are available either for a 40m x 40m green or a 40m x 30m green
The package is designed for installation by someone with competent DIY skills. It includes:
- 5,000 litre irrigation storage tank with mains water connection
- Water Regulation compliance kit
- Multi-stage stainless steel pump with auto-start, pre-assembled and tested
- Irrigation controller with rain sensor
- Pipework from pump to green with necessary fittings
- 4 RainBird 950E sprinklers (2 RainBird and 2 Hunter on 40m x 30m)
The system requires a minimum flow to the tank of 600 l/h and single-phase power for the pump and also the controller. Supplied with plans and instructions for installation.